EWM WEGA DRIVE 41 Instructions d'exploitation télécharger pdf (Page 30)

Machine description – quick overview

Machine control – Operating elements

099-004965-EW501

26.09.2011

4.3.3.1 Select JOB number (welding task)

This microprocessor-controlled control works according to the one-dial operation principle.

Only the gas type, material type and wire electrode diameter should be set as the JOB number on the

control, as well as welding output via the step switch. This defines the welding task and the system

specifies the optimum wire feed speed for the required operating point after the "Test button" is pressed.

These settings are retained after the machine is switched off. After switching on again, the parameters

previously set can be used to continue welding.

The user has the option to correct the wire feed speed according to the welding task or individual

requirements.

The welding task setting can also be made using the two-dial operation principle, however. To do this, set

the "JOB 0" (manual / no program) from the JOB list, the welding voltage on the step switch, and the wire

speed on the rotary dial. Other parameters are set as described under "Using synergic mode".

Operating

element

Action Result

X x

Select "JOB". When the "JOB" LED lights, press and hold

down the button.

2 sec.

"JOB" LED flashes.

The welder uses the filler material inserted and the connected shielding gas to select the JOB number

according to the "JOB-LIST". The "JOB-LIST" is a sticker fixed near the wire feed drive unit.

Set JOB number (0-24).

1 x

Confirm selection.

CrNi

Ar98/2

Ar82/18

AlMg

Ar100

AlSi

Ar100

Al99

Manuell / no program

Ar100

Gas

0,8

1,0

1,2

1,6

Job-Nr.

Material

5678

SG2/3

G3/4 Si1

CO 100

Massivdraht / Solid Wire

Wire

094-010488-00500

Figure 4-12

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 65 66

Commentaires sur ces manuels

Pas de commentaire

EWM WEGA DRIVE 41 Instructions d'exploitation Page 30

Commentaires sur ces manuels

Produits connexes et manuels pour Système de soudage EWM WEGA DRIVE 41